Master Distributor of USI Technologies
Made in America
Reduce downtime. Speed commissioning. Prove compliance.
Accuracy and control
0.3° with MODBUS or 0.5° with 4-20 mA
Interfaces: MODBUS RTU or TCP,
4-20 mA, 0-10 V
Programmable analog feedback on XT
Reliability and endurance
6000+ starts per hour for frequent cycling
Permanently lubricated drivetrain
for low maintenance
SuperCap backup to support a safe
position on power or signal loss
Operating temperature: X Series
-40 to 140°F, XT -22 to 140°F
Safety and environment
X Series hazardous location: Class I,
Division II (Groups A-D)
Enclosures: NEMA 4 for X Series,
NEMA 4X for XT
Mounting: ISO 5211 F07 or F10 on
X Series, 0.625″ Double-D shaft on XT
Contact Hatfield at usiactuators@hatfieldandcompany.com for sizing assistance and a streamlined process from specification to installation.
Built for these Environments
Oil and Gas / Petrochemical
Hazardous-location X-Series with C1D2 (A-D) and 0.3° precision for valve automation.
Water and Wastewater
Precise modulating control and programmable feedback for plants and lift stations.
Industrial OEMs
XT actuators and custom controllers for compressors, car wash, and packaging systems.
PRODUCT HIGHLIGHTS
SmartStep™ X-SERIES
Hazardous-location rated as standard, multi-turn capable, and built for continuous duty.
– 0.3° (MODBUS) or 0.5° (4-20 mA) precision
– Up to 5000 in-lb torque, 100% modulation
– 6000+ starts/hour; permanently lubricated drivetrain
– NEMA 4 cast-aluminum enclosure; ISO 5211 F07/F10
– Operating temperature -40 to 140°F; SuperCap backup option
Specifications:
– Torque: 500, 1200, 2500, 5000 in-lb
– Accuracy: 0.3° (MODBUS) or 0.5° (4-20 mA)
– Control: 4-20 mA, 0-10 V, MODBUS RTU/TCP
– Enclosure: NEMA 4 (cast aluminum)
– Mounting: ISO 5211 F07/F10
– Starts per hour: >= 6000
– Temperature: -40 to 140°F
PRODUCT HIGHLIGHTS
S-Series
Key Features:
– UL/CUL and CE approved with Class 1, Division II, Group A, B, C, and D Hazardous Location Rating
– SuperCap Backup option provides enough power for at least 90° stroke during power or signal loss, has a life expectancy greater than 10 years!
– Maintenance-free; low cost of ownership
– Easily calibrate and setup end points in a matter of seconds
– ISO 5211 direct mounting for F05, F07, and F10 compatible valves
– Power input modules support 12-24VDC, 24VAC, or 100VAC to 240VAC
– Unlimited programmable cycle span. Multi-turn capable!
– Manual override available
– Common Firmware base; consistent user experience across models
– Modular Design: SuperCap and Electronic Controllers are field replaceable in minutes!
– 2-year parts warranty covers actuator under standard usage
PRODUCT HIGHLIGHTS
R-Series
Key Features:
– Robust design engineered for 100% Modulation, 100% Continuous Duty Cycle and Open/Close operation.
– UL/CUL and CE approved with Class 1, Division II, Group A, B, C, and D Hazardous Location Rating.
– SuperCap Backup opon provides enough power for at least 90° stroke during power or signal loss, has a life expectancy
greater than 10 years!
– Maintenance-free; low cost of ownership.
– Easily calibrate and setup end points in a matter of seconds.
– ISO 5211 direct mounng for F05 and F07 compatible valves.
– Power input modules support 12-24VDC, 24VAC3, or 100VAC to 240VAC.
– Unlimited programmable cycle span.
– Manual override available.
– Common Firmware base; still uses the same underlying firmware as the X and S series.
– Modular Design: SuperCap and Electronic Controls are field replaceable in minutes!
– 2-year parts warranty covers actuator under standard usage.
– Physical lockout switch disables the buttons for extra security & vibration/noise resistance.